LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2000 >> Discovery >> Repair and Diagnosis >> Brakes >> Traction Control >> Self-Leveling & Anti-Lock Braking System - Repair >> Removal & Installation >> Modulator Unit - Abs >> Remove
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Modulator Unit - Abs: Remove

  1. Position cloth under modulator to absorb fluid spillage.
    CAUTION: Brake fluid will damage paint finished surfaces. If spilled, immediately remove fluid and clean.
  2. Disconnect 3 multiplugs from ABS modulator. See Fig 1.
  3. Disconnect 2 inlet brake pipe unions from pump side of modulator.
    CAUTION: Always fit plugs to open connections to prevent contamination.
  4. Disconnect 4 outlet brake pipe unions from top of modulator. See Fig 1.
    CAUTION: Always fit plugs to open connections to prevent contamination.
  5. Loosen 3 nuts securing modulator to mounting bracket.
  6. Release and remove modulator from mounting bracket.
  7. Remove 3 mounting rubbers from modulator.
Fig 1: Removing/Installing ABS Modulator Unit
G00389460Courtesy of LAND ROVER NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals