Body Control Module: Service and Repair

Remove
1. Disconnect battery negative lead.
2. Remove RH front seat for access.

Body Electrical Control Module (BeCM):

3. Remove 2 screws securing heater rear outlet duct. Remove duct.
4. Release carpet over BeCM. Position aside.
5. Remove 2 nuts and screw securing BeCM to mounting.
6. Disconnect multiplugs from BeCM.
7. Release terminal covers.
8 .Disconnect 1 earth and 3 feed wires.
9. Remove BeCM.

Refit
10. Reverse removal procedure.