LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 1995 >> Range Rover SE >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Electrical Control Module - 4.0L & 4.6L >> Removal & Installation >> Body Electrical Control Module >> Removal & Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal & Installation

  1. Disconnect battery negative lead.
  2. Remove drivers side front seat for access. See PASSENGER'S SEAT ASSEMBLY  .
  3. Remove 2 screws securing heater rear outlet duct. Remove duct. See Fig 1 .
  4. Release carpet over BECM. Position aside.
  5. Remove 2 nuts and screw securing BECM to mounting. See Fig 1 .
  6. Disconnect multiplugs from BECM. See Fig 1 .
  7. Release terminal covers.
  8. Disconnect 1 earth and 3 feed wires. See Fig 1 .
  9. Remove BECM. See Fig 1 .
  10. To install, reverse removal procedure.
Fig 1: Removal & Installation Of Body Electrical Control Module
G00099552Courtesy of LAND ROVER NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals