October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Inspection Procedure

Refer to "HEATED OXYGEN SENSOR (HO2S) " and visually and/or physically inspect following conditions;
- Proper installation of O2 Sensors.
- Check for corrosion on terminals.
- Check for damaged wiring.
- Fuel, Engine coolant or oil contamination.
- Check for good ground for O2 sensor
Has any problems been found?
Good
- Go to "EVAP SYSTEM INSPECTION" procedure.
No Good
- Repair as necessary and than Go to "VERIFICATION OF REPAIR " procedure.