DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	Signal monitoring	Poor connector connection Faulty the SBW actuator Faulty the position sensor Faulty the SCU
Enable Condition	Ignition "ON" (diagnose even when EV mode "ON") Auxiliary battery voltage is more than 10V SBW actuator position sensor normal SBW motor system normal
Threshold Value	Target duty is greater than 0 but the change in motor position is reduced or the target duty is less than 0%, but the change in motor position increases When the position sensor standards motor system is operated in reverse direction. - greater than 10%
Fail Safe	Before threshold value: maintain previous signal After threshold value maintain current gear, Display of SBW system warning statements at D/N/R signal "P" range: EPB, parking warning statement set
MIL ON Condition	2 driving cycles