Component Inspection
WARNING: This page is about a different variant/trim than selected.
- Checks the output voltage of the sensor 1 and sensor 2 according to accelerator pedal state by using the KDS.
| Accelerator Pedal Position |
Output voltage (V) |
| APS 1 |
APS 2 |
| Accelerator pedal is not pressed |
0.7 - 0.8 |
0.33 - 0.43 |
| Accelerator pedal is fully pressed |
3.98 - 4.22 |
1.93 - 2.17 |