LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2023 >> Telluride EX X-Line >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System Control Module (SRSCM) And Sensors >> SRS Control Module (SRSCM) >> Removal & Installation >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal & Installation: Removal

  1. Disconnect the battery negative (-) terminal.
    NOTE: After disconnecting the battery negative (-) terminal, wait at least 3 minutes and 30 seconds.
  2. Remove the floor console assembly.

    (Refer to Body - "FLOOR CONSOLE ASSEMBLY ")

  3. Disconnect the supplemental restraint system control module connectors (A).
    G15709259Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the supplemental restraint system control module (A) after removing the bolt and nuts.

    Tightening torque 

    Bolt:  10.8 - 13.7 N.m (1.1 - 1.4 kgf.m, 8 - 10.1 lb.ft)

    Nut:  6.9 - 7.8 N.m (0.7 - 0.8 kgf.m, 5.1 - 5.8 lb.ft)

G15709260Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals