Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.

NOTE:

Install the component with the specified torque.
Note that internal damage may occur when the component is dropped. In this case, use it after inspecting.

Install in the reverse order of removal.
Supplement the engine coolant.
(Refer to Engine Mechanical System - "COOLANT ")
Reset the ECM adaptive values after replacing the ETC.

Courtesy of KIA MOTORS AMERICA, INC.

Courtesy of KIA MOTORS AMERICA, INC.
Perform the ETC learning procedure.
(Refer to ETC (Electronic Throttle Control) System - "ADJUSTMENT ")