LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2022 >> Forte GT Line >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Control System - 1.6L) >> Purge Control Solenoid Valve (PCSV) >> Repair Procedures >> Removal And Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal And Installation

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the purge control solenoid valve connector (A) and vapor hose (B).
  3. Remove the purge control solenoid valve (C).
    G14560889Courtesy of KIA MOTORS AMERICA, INC.
  4. Install in the reverse order of removal.
NOTE:
  • Install the Purge Control Solenoid Valve (PCSV) to the specified torque.
  • If PCSV is dropped, it may cause internal damage. (Do not reuse)
  • Be careful not to get foreign matters into the PCSV.
scientia non olet · About LEMON Manuals