LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2021 >> Sedona LX >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control Module Diagnosis >> DTC B1210-00: Front Left Sensor Fault >> Component Inspection >> Inspection Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Inspection Procedure

  1. Ignition "ON".
  2. Place gear lever position to "D"
  3. Using Automotive Stethoscope, listen to sensor operation sound.
  4. Is sensor operation sound heard?

    Good 

    • Fault might be intermittent and caused either by poor contact in connectors or wiring harness, or it has been repaired and control module memory is not cleared yet. Thoroughly check terminal of battery, all connectors (and connections) for looseness, bending, corrosion, contamination, deterioration, or damage.
    • Repair or replace as necessary and then go to "VERIFICATION OF REPAIR " procedure.

    No Good 

    • Carefully re-do this troubleshooting guide steps.
    • If problem still occurs, replace Front Left Sensor and then go to "VERIFICATION OF REPAIR " procedure.
scientia non olet · About LEMON Manuals