LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2020 >> Telluride SX, 4WD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Intake Air Temperature Sensor (IATS) >> Repair Procedures >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Repair Procedures: Removal

  1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  2. Disconnect the vacuum hose (A).
    G13310002Courtesy of KIA MOTORS AMERICA, INC.
  3. Disconnect the intake temperature sensor connector (A).
  4. Remove the sensor after loosening the mounting bolt.

    Intake Air Temperature Sensor (IATS) mounting bolt: 

    8.8 - 10.7 N.m (0.9 - 1.1 kgf.m, 6.5 - 7.9 lb.ft)

    G13310003Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals