LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2019 >> Stinger Base, RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L >> Heated Oxygen Sensor (H02S) >> Repair Procedures >> Removal >> [Bank 1/Sensor 1]
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

[Bank 1/Sensor 1]

  1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  2. Disconnect the connector (A), and then remove the sensor (B).
G12792303Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals