LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2019 >> Soul Base, Standard Trans >> Repair and Diagnosis >> Transmission >> Clutch >> Clutch System >> Clutch Switch >> Repair Procedures >> Inspection >> Signal Circuit Inspection
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Signal Circuit Inspection

  1. Check clutch switch pull-up voltage
    1. IG KEY "OFF", ENGINE "OFF".
    2. Disconnect clutch switch connector.
    3. IG KEY "ON".
    4. Measure the voltage between signal terminal of clutch switch harness connector and chassis ground.

      Specification:  11.5V ~ 13.0V

  2. Check open in clutch switch signal circuit
    1. IG KEY "OFF", ENGINE "OFF".
    2. Disconnect clutch switch connector and ECM connector.
    3. Check continuity between signal terminal of clutch switch harness connector and ECM harness connector.

      Specification:  Continuity (below 1.0 Ω)

scientia non olet · About LEMON Manuals