October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Verification Of Repair

After a repair, it is essential to verify that the fault has been corrected.

Connect KDS/GDS and select "Diagnostic Trouble Codes (DTC)" mode.
Using a KDS/GDS, Clear DTC.
Operate the vehicle within DTC Detecting Condition in General Information.
Using a KDS/GDS, Check DTC present.
Are any DTCs present?
YES
- Go to the applicable troubleshooting procedure.
NO
- System is performing to specification at this time.