October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Power Circuit Inspection

Ignition switch "OFF"
Refer to "4WD ECU " and disconnect 4WD ECU connector.
Ignition switch "ON"
Measure the voltage between Pin No. 15 (Power) terminal of 4WD ECU harness connector and chassis ground.
Specification: B+
Is the measured value within specification?
YES
- Go to "GROUND CIRCUIT INSPECTION " procedure.
NO
- Repair open or short in power circuit and then go to "VERIFICATION OF REPAIR " procedure.