LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2019 >> Rio S, 4D Hatchback >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System >> Battery Sensor >> Repair Procedures >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Repair Procedures: Removal

  1. Turn the ignition switch OFF.
  2. Disconnect the battery negative (-) terminal (A).

    Battery negative (-) terminal tightening nut: 

    8.0 - 10.0 N.m (0.8 - 10.0 kgf.m, 5.9 - 7.4 lb.ft)

    G12576366Courtesy of KIA MOTORS AMERICA, INC.
  3. Disconnect the battery sensor connector (A).
    G12576367Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the battery sensor by loosening the mounting bolts (A).

    Battery sensor cable mounting bolt(Chassis ground): 

    27.0 - 33.0 N.m (2.8 - 3.4 kgf.m, 19.9 - 24.3 lb.ft)

    G12576368Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals