LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2019 >> Optima EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 274 (Engine Control System (PHEV)) >> Crankshaft Position Sensor (CKPS) >> Repair Procedures >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Repair Procedures: Removal

WARNING: This page is about a different car, the 2018 Kia Optima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) termnial.
  2. Remove the engine room under cover.

    (Refer to Engine Mechanical System - "ENGINE ROOM UNDER COVER ")

  3. Disconnect the crankshaft position sensor connector (A) and remove the sensor (B) after removing the installation bolt.

    Crankshaft position sensor installation bolt: 

    7.8 - 11.8 N.m (0.8 - 1.2 kgf.m, 5.8 - 8.7 lb.ft)

G12347278Courtesy of KIA MOTORS AMERICA, INC.
G12347279Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals