Repair Procedures: Inspection
WARNING: This page is about a different car, the 2019 Kia Soul EV. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition switch OFF.
- Disconnect the intake actuator connector.
- Verify that the actuator operates to the recirculation position when 12V is connected to terminal 3 and ground to terminal 7.
Verify that the intake actuator operates to the recirculated air position when connected in reverse.
- Connect the intake actuator connector.
- Turn the ignition switch ON.
- Check the voltage between terminals 5 and 6.
Specification
Door position Voltage (V) Error detecting Fresh air 0.3±0.15 Low voltage: 0.1V or less
High voltage: 4.9V or moreRecirculated air 4.7±0.15 It will feedback the current position of the actuator to controls.
- If the intake actuator does not operate well, substitute with a verified intake actuator and check for proper operation. Use the replaced actuator if it performs well.