October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Component Inspection

Ignition "OFF", connect KDS/GDS to Data Link Connector (DLC).
Ignition "ON". & engine "ON".
Check the "Current Data" about related DTC with KDS/GDS.
Is measured value within specification?
YES
- Go to "VERIFICATION OF REPAIR " procedure.
NO
- Carefully re-do this troubleshooting guide steps.
- If no problems were found with the circuits or connectors, replace the Battery Sensor and go to "VERIFICATION OF REPAIR " procedure.