October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Module Ground Circuit Inspection

Ignition "OFF".
Disconnect FPCM connectors.
Measure resistance between Pin No. 9 (ground) terminal of FPCM connector and chassis ground.
Specification: Approx. below 1Ω
Is the measured value within specification?
YES
- Go to "CAN COMMUNICATION LINE INSPECTION " procedure.
NO
- Repair open or short in ground circuit, and then go to "VERIFICATION OF REPAIR " procedure.