LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2018 >> Soul Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Control System - 2.0L) >> Camshaft Position Sensor (CMPS) >> Repair Procedures >> Removal >> [Bank 1/Intake]
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

[Bank 1/Intake]

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the camshaft position sensor connector (A).
  3. Remove the mounting bolt (B), and then remove the sensor.
Fig 1: Locating Camshaft Position Sensor Connector And Mounting Bolt (Bank 1/Intake)
G12239125Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals