LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2018 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Control System Diagnosis - 1.6L (1 Of 3) >> DTC P0133: O2 Sensor Circuit Slow Response (Bank 1/Sensor 1) >> Wiring Inspection >> Signal Circuit Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Signal Circuit Inspection

  1. Ignition "OFF" and disconnect HO2S upstream (S1) connector.
  2. Ignition "ON".
  3. Measure voltage between Pin No. 2 (Nernst Voltage) terminal of HO2S (S1) harness connector and chassis ground.

    Measure voltage between Pin No. 1 (Virtual Ground) terminal of HO2S (S1) harness connector and chassis ground.

    Measure voltage between Pin No. 3 (Pumping Current) terminal of HO2S (S1) harness connector and chassis ground.

    Measure voltage between Pin No. 6 (Trim Resistor) terminal of HO2S (S1) harness connector and chassis ground.

    Specification: 

    Nernst Voltage: Approx 2.4V

    Virtual Ground Output: Approx 2.6V

    Pumping Current: Approx 2.4V

    Trim Resistor: Approx 2.4V

  4. Is the measured voltage within specification?

    YES 

    NO 

scientia non olet · About LEMON Manuals