October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Power Circuit Inspection

The cooling fan 2 (50A) is checked.
IG "OFF" & Disconnect Cooling fan2 Relay connector.
IG "ON".
Measure voltage between Pin No. 2 (Cooling fan2 Relay Control) terminal of cooling fan motor harness connector and chassis ground.
Specification: B+
Is the measured voltage within specification?
YES
- Go to "CONTROL CIRCUIT INSPECTION " procedure.
NO
- Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.