LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2018 >> Forte5 EX >> Repair and Diagnosis (Single Page) >> Body & Frame >> Windows >> Power Windows >> Power Window Switch >> Repair Procedures >> Inspection >> Power Window Main Switch Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Power Window Main Switch Inspection

  1. Disconnect the negative (-) battery terminal.
  2. Remove the front door trim.

    (Refer to Body - "FRONT DOOR TRIM ")

  3. Disconnect the connector from the power window switch module.
    Fig 1: Disconnecting Connector From Power Window Switch Module
    G12164904Courtesy of KIA MOTORS AMERICA, INC.
  4. Check for continuity between the terminals in each switch position according to the table.

    [Driver/Passenger Safety] 

    Fig 2: Driver/Passenger Safety Connector Terminals Continuity Chart (1 Of 2)
    G12164905Courtesy of KIA MOTORS AMERICA, INC.
    Fig 3: Driver/Passenger Safety Connector Terminals Continuity Chart (2 Of 2)
    G12164906Courtesy of KIA MOTORS AMERICA, INC.

    [Driver Auto Down] 

    Fig 4: Driver Auto Down Connector Terminals Continuity Chart (1 Of 2)
    G12164907Courtesy of KIA MOTORS AMERICA, INC.
    Fig 5: Driver Auto Down Connector Terminals Continuity Chart (2 Of 2)
    G12164908Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the power window switch (A) after loosening the screws.
Fig 6: Removing Power Window Switch Screws
G12164909Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals