Repair Procedures: Installation

WARNING: This page is about a different car, the 2017 Kia Niro. However, it is still accessible from the selected car via links, so may be relevant.

Apply engine oil to the oil cooler packing surface (A).

Fig 1: Applying Engine Oil To Oil Cooler Packing Surface
Courtesy of KIA MOTORS AMERICA, INC.
Install the oil cooler (A) with a fixing bolt (B).
Tightening Torque :

50.1 - 55.9 N.m (5.1 - 5.7 kgf.m, 36.9 - 41.2 lb.ft)

Fig 2: Installing Oil Cooler With Fixing Bolt
Courtesy of KIA MOTORS AMERICA, INC.

NOTE: Fix position of oil cooler stopper where oil cooler resists on ladder frame stopper.
Connect the coolant hose (A).

Fig 3: Connecting Coolant Hose
Courtesy of KIA MOTORS AMERICA, INC.
Fill the coolant.
(Refer to Cooling System - "COOLANT ")
Install the oil filter and then fill the engine oil.
(Refer to Lubrication System - "ENGINE OIL ")
Install the engine room under cover.
(Refer to Engine and Transaxle Assembly - "ENGINE ROOM UNDER COVER ")