LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2018 >> Forte LX, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Control System - 2.0L GDI) >> Variable Intake Solenoid (VIS) Valve >> Repair Procedures >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the variable intake solenoid valve connector (A).
  3. Disconnect the vacuum hoses (B) from the valve.
  4. Remove the installation nut, and then remove the valve from the surge tank.
Fig 1: Disconnecting Variable Intake Solenoid Valve Connector
G12162522Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals