LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2018 >> Cadenza Technology >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (5 Of 6) >> DTC P1220-00: Oil Pump Solenoid Control Circuit >> Wiring Inspection >> Power Circuit Inspection
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Power Circuit Inspection

  1. Ignition "OFF"
  2. Disconnect the Oil Pump Solenoid Valve connector.
  3. Ignition "ON"
  4. Measure voltage between Pin No. 1 (Fuse-SENSOR2) terminal of Oil Pump Solenoid Valve harness connector and chassis ground.

    Specification:  Approx. 12V

  5. Is the measured value within specification?

    YES 

    NO