LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2018 >> Cadenza Limited >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Canister Close Valve (CCV) >> Repair procedures >> Removal
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Repair procedures: Removal

  1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  2. Remove the rear-LH wheel, tire, and the inner wheel house (A).
    Fig 1: Removing Rear-LH Wheel, Tire And Inner Wheel House
    G12290796Courtesy of KIA MOTORS AMERICA, INC.
  3. Disconnect the canister close valve connector (A).
    Fig 2: Disconnecting Canister Close Valve Connector
    G12290797Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the vapor hoses (A).
  5. Remove installation bolts (B) and then remove the fuel tank air filter & CCV.
    Fig 3: Disconnecting Vapor Hoses
    G12290798Courtesy of KIA MOTORS AMERICA, INC.
  6. Release the lever (A), and then separate the canister close valve (B) from the fuel tank air filter after rotating it in the direction of the arrow in the figure.
    Fig 4: Releasing Lever
    G12290799Courtesy of KIA MOTORS AMERICA, INC.
    Fig 5: Rotating Canister Close Valve From Fuel Tank Air Filter
    G12290800Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals