Monitor GDS Data

Ignition "OFF", connect GDS.
Ignition "ON" (Power Button LED "Red"), select "Current Data" mode.
Monitor the "Read Class Status" parameter on the GDS.

Fig 1: Scantool Display - Read Class Status (Passenger Unoccupied)
Courtesy of KIA MOTORS AMERICA, INC.

Fig 2: Scantool Display - Read Class Status (Passenger Occupied)
Courtesy of KIA MOTORS AMERICA, INC.
Has a problem been found?
YES
- Go to "BODY SENSOR RESET " procedure.
NO
- Fault is intermittent caused by poor contact in the part's and/or SRSCM connector or was repaired and SRSCM memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.