LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2017 >> Optima EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Engine Control System - 1.6L (Except HEV)) >> Crankshaft Position Sensor (CKPS) >> Repair Procedures >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the crankshaft position sensor connector (A).
    Fig 1: Locating Crankshaft Position Sensor Connector
    G12140219Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the engine room under cover,

    (Refer to Engine Mechanical System - "ENGINE ROOM UNDER COVER ")

  4. Remove the sensor (A) by loosening the mounting bolt.
    Fig 2: Locating Crankshaft Position Sensor
    G12140220Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals