LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2017 >> Optima EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Automatic Transaxle Control System - 2.4L (Except HEV)) >> Input Speed Sensor >> Repair Procedures >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Removal

WARNING: This page is about a different car, the 2018 Kia Optima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the valve body assembly.

    (Refer to Hydraulic System - "VALVE BODY ")

  2. Disconnect the input & output speed sensor connector (A).
  3. Remove the input & output speed sensor (B) after loosening the bolts.

    Tightening torque: 

    9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

Fig 1: Disconnecting Input & Output Speed Sensor Connector
G12148180Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals