LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2017 >> Niro LX >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System >> Filler-Neck Assembly >> Repair Procedures >> Removal
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Repair Procedures: Removal

  1. Open the fuel filler door.
  2. Switch "OFF" the ignition and disconnect the negative (-) terminal of the auxiliary 12V battery.
  3. Remove the filler-neck assembly mounting bolt (A).
    Fig 1: Removing Filler-Neck Assembly Mounting Bolt
    G12335958Courtesy of KIA MOTORS AMERICA, INC.
  4. Lift the vehicle.
  5. Remove the rear-LH wheel, tire, and the inner wheel house (A).
    Fig 2: Removing Rear-LH Wheel, Tire And Inner Wheel House
    G12335959Courtesy of KIA MOTORS AMERICA, INC.
  6. Disconenct the fuel filler hose (A) and leveling hose (B).
  7. Disconnect the ventilation tube quick-connector (C).
    Fig 3: Disconnecting Fuel Filler Hose And Leveling Hose
    G12335960Courtesy of KIA MOTORS AMERICA, INC.
  8. Remove the filler-neck assembly (B) after loosening the mounting bolt (A).
Fig 4: Removing Filler-Neck Assembly (1 Of 2)
G12335961Courtesy of KIA MOTORS AMERICA, INC.
Fig 5: Removing Filler-Neck Assembly (2 Of 2)
G12335962Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals