October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
[Mechanical Inspection]
- Turn ignition switch OFF.
- Disconnect the NVLD connector.
- Remove the NVLD.
- Connect the hose (A) to the canister hose connected port below.
- After immersing the hose (A) in water, Apply more than 6 mbar (positive) pressure to Atmosphere port (B).
- If the NVLD is normal, many bubbles will indicate large leak.
NOTE:
Allowable internal leakage of 0.35 g/hr at 3 mbar will show as one bubble every second (approximately).
Courtesy of KIA MOTORS AMERICA, INC.