Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.

Disconnect the battery negative terminal.
Remove the engine cover.
Disconnect the ignition coil connector (A).

Fig 1: Locating Ignition Coil Connector
Courtesy of KIA MOTORS AMERICA, INC.
NOTE:
- When removing the ignition coil connector, pull the lock pin (A) and push the clip (B).
Fig 2: Pulling Lock Pin
Courtesy of KIA MOTORS AMERICA, INC.
Remove the ignition coil (A).

Fig 3: Locating Ignition Coil With Bolts
Courtesy of KIA MOTORS AMERICA, INC.