July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.

Disconnect the battery negative (-) terminal.
Disconnect the battery sensor connector (A).
Remove the battery negative (-) terminal after removing the bolts.
Battery sensor terminal mounting bolt:

29.4 - 31.4 N.m (3.0 - 3.2 kgf.m, 21.7 - 23.1 lb.ft)

Battery (-) terminal tightening nut:

4.0 - 6.0 N.m (0.4 - 0.6 kgf.m, 3.0 - 4.4 lb.ft)

Fig 1: Removing Battery Sensor Terminal Mounting Bolt
Courtesy of KIA MOTORS AMERICA, INC.