Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Kia Forte5 and 2017 Kia Forte Koup. However, it is still accessible from the selected car via links, so may be relevant.

Turn the crankshaft pulley clockwise, and align its groove with the timing mark of the timing chain cover.

Fig 1: Aligning Crankshaft Pulley Groove With Timing Mark Of Timing Chain Cover
Courtesy of KIA MOTORS AMERICA, INC.
Remove the Timing Chain Cover.
(Refer to Timing System - "TIMING CHAIN COVER ")
Align the timing marks of the CVVT sprockets with the upper surface of the cylinder head to make No. 1 cylinder be positioned at TDC.
CAUTION: Check the dowel pin of the crankshaft for facing upside of the engine at this moment.

Fig 2: Locating Timing Marks Of CVVT Sprockets
Courtesy of KIA MOTORS AMERICA, INC.

Fig 3: Locating Timing Mark Of CVVT Sprocket
Courtesy of KIA MOTORS AMERICA, INC.
Remove the timing chain auto tensioner (A).

Fig 4: Locating Timing Chain Auto Tensioner
Courtesy of KIA MOTORS AMERICA, INC.

CAUTION: Before removing the tensioner, fix the piston of the tensioner with a pin through the hole (B) at compressed position.
Remove the timing chain tensioner arm (A) and guide (B).

Fig 5: Locating Timing Chain Tensioner Arm And Guide
Courtesy of KIA MOTORS AMERICA, INC.
Remove the timing chain (A).

Fig 6: Locating Timing Chain

Courtesy of KIA MOTORS AMERICA, INC.