Repair Procedures: Removal

WARNING: This page is about a different car, the 2018 Kia Forte5 and 2018 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.

Information

When replacing the LKAS switch, check that the symbol mark in the cluster operates normally by pressing the ON/OFF switch.

Fig 1: Checking Symbol Mark In Cluster

Courtesy of KIA MOTORS AMERICA, INC.

Disconnect the negative (-) battery terminal.
Using a screwdriver or remover, remove the LKAS cover (A).

Fig 2: Removing LKAS Cover
Courtesy of KIA MOTORS AMERICA, INC.
Remove the LKAS unit (B) after disconnecting the LKAS unit connector (A).

NOTE: When pulling out the mounting bracket, be careful not to damage it.

Fig 3: Disconnecting LKAS Unit Connector

Courtesy of KIA MOTORS AMERICA, INC.