Repair Procedures: Inspection

1. Turn ignition switch OFF.
2. Remove the battery and battery tray.

   (Refer to Engine Electrical System - "BATTERY ")

3. Disconnect the solenoid valve connector (A).
   Fig 1: Locate Solenoid Valve Connector

   Courtesy of KIA MOTORS AMERICA, INC.
4. Measure the resistance between power terminal (10) and signal terminal (6).

Specification:  5.1 ± 0.3 Ω

Fig 2: Measure Resistance Between Terminals

Courtesy of KIA MOTORS AMERICA, INC.