LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2016 >> Sedona L >> Repair and Diagnosis >> External Pages >> Different car >> Section 176 (Electronic Stability Program (Esp) System) >> Electronic Stability Program >> Troubleshooting >> Communication with GDS is Not Possible. (Communication with Any System is Not Possible.) >> Inspection Procedures
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Inspection Procedures

WARNING: This page is about a different car, the 2017 Kia K900. However, it is still accessible from the selected car via links, so may be relevant.

Check The Power Supply Circuit For The Diagnosis 

  1. Measure the voltage between terminal 16 of the data link connector and body ground.

    Specification:  approximately B+

    Fig 1: Measuring Voltage Between Terminal 16 Of Data Link Connector And Body Ground
    G11800864Courtesy of KIA MOTORS AMERICA, INC.
  2. Is voltage within specification?

    YES 

    • Check the ground circuit for the diagnosis.

    NO 

    • Remedy an open in the wire. Check and replace fuse from the engine compartment junction block.
scientia non olet · About LEMON Manuals