LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2016 >> Sedona L >> Repair and Diagnosis >> External Pages >> Different car >> Section 172 (Engine Control System - 3.8L) >> Accelerator Position Sensor (APS) >> Repair Procedures >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Kia K900. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the Ignition Switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the accelerator position sensor connector (A).
  3. Disconnect the accelerator control connector (B).
  4. Remove the accelerator pedal in the direction of "Removal direction" in the image after removing the installation bolt (B).
Fig 1: Removing Accelerator Pedal
G11804996Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals