Component Inspection

■ Perform Cooling Fan 2 Actuation Test 

1. Connect GDS to Data Link Connector (DLC).
2. IG KEY "ON" & ENG "OFF".
3. Perform "Actuation Test" for cooling fan.
4. Does the Cooling Fan 2 operate properly? (Check Variation)

   YES 

   • Go to "VERIFICATION OF VEHICLE REPAIR " procedure.

   NO 

   • Carefully redo this troubleshooting guide steps.
   • If no problems were found with the circuits or connectors, replace the Cooling Fan 2 Relay and go to "VERIFICATION OF VEHICLE REPAIR " procedure.