| DTC Strategy |
|
- Poor connector connection
- Air leak in intake or exhaust system
- Defected fuel system
- Defected upstream O2 sensor
- Defected ECM
|
| General Enable Conditions |
- Downstream O2 sensor voltage before fuel cut is higher than 0.15V
- Fuel cut "OFF"
- Exhaust gas temperature around upstream O2 sensor is higher than 752°F (400°C)
- Exhaust gas mass flow is higher than 22 kg/h
- Battery voltage is higher than 10.7V
- Engine speed is at between 1200 RPM and 3520 RPM.
|
| Threshold Value |
Case1 |
|
| Case2 |
|
| Diagnostic Time |
|
| Mil ON Condition |
|