LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2016 >> K900 V6 >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Program (Esp) System >> Electronic Stability Program >> Troubleshooting >> ABS Does Not Operate >> Check the Power Source Circuit
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Check the Power Source Circuit

  1. Disconnect the connector from the ABS control module.
  2. Turn the ignition switch ON, measure the voltage between terminal 29 of the ABS control module harness side connector and body ground.

    Specification:  approximately B+

    Fig 1: Measuring Voltage Between Terminal 29 Of ABS Control Module Connector And Body Ground
    G11800861Courtesy of KIA MOTORS AMERICA, INC.
  3. Is the voltage within specification?

    YES 

    • Check the ground circuit.

    NO 

    • Check the harness or connector between the fuse (10A) in the engine compartment junction block and the ABS control module. Remedy if necessary.
scientia non olet · About LEMON Manuals