Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.

Disconnect the battery (-)terminal (A) and then (+)terminal (B).

Fig 1: Disconnect Battery Terminal
Courtesy of KIA MOTORS AMERICA, INC.
Remove the air duct and air cleaner assembly.
(Refer to Engine Mechanical System - "AIR CLEANER ")
Remove the battery mounting bracket and the insulation pad, and then remove the battery (A).

Fig 2: Remove Battery Mounting Bracket
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the ECM connector (A), and then remove ECM (B) after removing the bolts/nut.
Remove the battery tray (C) after removing the bolts.

Fig 3: Remove Battery Tray

Courtesy of KIA MOTORS AMERICA, INC.