LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2016 >> Forte Koup SX, Automatic Trans >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Engine Control System - 1.6L >> Knock Sensor (KS) >> Repair Procedures >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the cable from alternator "B" terminal (A).
    Fig 1: Locate Alternator Cable Terminal
    G11794894Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the knock sensor bracket (A).
  4. Loosen the mounitng bolt (B) and disconnect the connector (C).
  5. Remove the sensor from the cylinder block.
Fig 2: Remove Knock Sensor (KS) From Cylinder Block
G11794895Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals