Repair Procedures: Replacement

WARNING: This page is about a different car, the 2017 Kia Soul EV. However, it is still accessible from the selected car via links, so may be relevant.

Remove the hole plug (A).
After loosening the mounting bolt, remove the front door outside handle cover (B).
Tightening Torque:

7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

Fig 1: Remove Front Door Outside Handle Cover
Courtesy of KIA MOTORS AMERICA, INC.
Remove the front door outside handle (A) by sliding it backward.

Fig 2: Remove Front Door Outside Handle
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the front door outside handle connector (A).

Fig 3: Disconnect Front Door Outside Handle Connector
Courtesy of KIA MOTORS AMERICA, INC.
Install in the reverse order of removal.
Information
- Be sure to install the outside handle pad (A) between the outside handle and the door panel.
  
  Fig 4: Install Outside Handle Pad Between Outside Handle And Door Panel
  Courtesy of KIA MOTORS AMERICA, INC.
- Make sure that the connectors are connected properly.
- Make sure that the door locks/unlocks and opens/closes properly.