Neutralization Status Check

WARNING: This page is about a different variant/trim than selected.

Connect the cable of GDS to the data link connector in driver side crash pad lower panel.
After IG ON, select the "Neutralization mode".

Fig 1: Scantool Display - Neutralization Mode

Courtesy of KIA MOTORS AMERICA, INC.

Fig 2: Scantool Display - Select Left Side Menu

Courtesy of KIA MOTORS AMERICA, INC.

Fig 3: Scantool Display - ECM Neutralization

Courtesy of KIA MOTORS AMERICA, INC.

Fig 4: Scantool Display - ECM Neutralization Test Completed

Courtesy of KIA MOTORS AMERICA, INC.

Fig 5: Scantool Display - SKM Neutralization

Courtesy of KIA MOTORS AMERICA, INC.

Fig 6: Scantool Display - SKM Neutralization Pin Code

Courtesy of KIA MOTORS AMERICA, INC.

Fig 7: Scantool Display - SKM Neutralization Test Completed

Courtesy of KIA MOTORS AMERICA, INC.