LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2015 >> K900 V6 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Body Control Module (BCM) >> Body Control Module (BCM) >> Repair Procedures >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel after loosening the mounting screws.

    (Refer to Body - "CRASH PAD LOWER PANEL ")

  3. Disconnect the connector (A) from smart key unit, BCM and tilt & telescopic unit.
    Fig 1: Identifying Smart Key Unit Connector
    G10715281Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the stop lamp switch of brake pedal.

    (Refer to Brake System - "BRAKE PEDAL ")

  5. Remove the front smart junction box.

    (Refer to Fuse And Relays - "RELAY BOX (PASSENGER COMPARTMENT) ")

  6. Remove the smart key (A) and BCM unit (B) after loosening bolt and nuts.
Fig 2: Identifying Smart Key And BCM Unit
G10715282Courtesy of KIA MOTORS AMERICA, INC.
Fig 3: Identifying Smart Key And BCM Unit Bolt
G10715283Courtesy of KIA MOTORS AMERICA, INC.
Fig 4: Loosening Smart Key And BCM Unit Bolts
G10715284Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals