Engine Control And Fuel System: Specifications: Sensors
WARNING: This page is about a different car, the 2015 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
Manifold Absolute Pressure Sensor (MAPS)
- Type: Piezo-resistive pressure sensor type
- Specification
Pressure [kPa (kgf/cm2 , psi)] Output Voltage (V) 20.0 (0.20, 2.9) 0.79 46.7 (0.47, 6.77) 1.84 101.3 (1.03, 14.7) 4.0
Intake Air Temperature Sensor (IATS)
- Type: Thermistor type
- Specification
Temperature [°C(°F)] Resistance (kΩ) -40(-40) 40.93 ~ 48.35 -20(-4) 13.89 ~ 16.03 0 (32) 5.38 ~ 6.09 10 (50) 3.48 ~ 3.90 20 (68) 2.31 ~ 2.57 40 (104) 1.08 ~ 1.21 50 (122) 0.76 ~ 0.85 60 (140) 0.54 ~ 0.62 80 (176) 0.29 ~ 0.34
Engine Coolant Temperature Sensor (ECTS)
- Type: Thermistor type
- Specification
Temperature [°C(°F)] Resistance (kΩ) -40(-40) 48.14 -20(-4) 14.13 ~ 16.83 0 (32) 5.79 20 (68) 2.31 ~ 2.59 40 (104) 1.15 60 (140) 0.59 80 (176) 0.32
Throttle Position Sensor (TPS) [integrated into ETC module]
- Type: Hall IC Non-contact sensor type
- Specification
Throttle Angle (°) Output Voltage (V) [Vref = 5.0V] TPS1 TPS2 0 0.5 4.5 10 0.96 4.05 20 1.41 3.59 30 1.87 3.14 40 2.32 2.68 50 2.78 2.23 60 3.23 1.77 70 3.69 1.32 80 4.14 0.86 90 4.6 0.41 98 4.65 0.35 C.T (0) 0.5 4.5 W.O.T (86) 4.41 0.59
Crankshaft Position Sensor (CKPS)
Camshaft Position Sensor (CMPS)
- Type: Hall effect type
Knock Sensor (KS)
Heated Oxygen Sensor (HO2S) [Bank 1/Sensor 1]
- Type: Zirconia (ZrO2) [Linear] type
- Specification
Item Specification Heater Resistance (Ω) 2.4 ~ 4.0 [20°C (69.8°F)]
Heated Oxygen Sensor (HO2S) [Bank 1/Sensor 2]
- Type: Zirconia (ZrO2) [Binary] type
- Specification
A/F Ratio (λ) Output Voltage (V) RICH 0.6 ~ 1.0 LEAN 0 ~ 0.4 Item Specification Heater Resistance (Ω) Approx. 9.0 [20°C (68°F)]
Accelerator Position Sensor (APS)
- Type: Variable resistor type
- Specification
Accelerator Position Output Voltage (V) APS1 APS2 C.T 0.7 ~ 0.8 0.29 ~ 0.46 W.O.T 3.85 ~ 4.35 1.93 ~ 2.18
Fuel Tank Pressure Sensor (FTPS)