Driveshaft & Axle - General Information: Specification: Notes
AXLE SHAFT SPECIFICATIONS
| Engine | Joint type | Max. permissible angle | ||
|---|---|---|---|---|
| Outer | Inner | Outer | Inner | |
| Nu 2.0 | BJ#92 | TJ#92 | 45° | 21° |
| Gamma 1.6 | BJ#92 | TJ#92 | 45° | 21° |
TIGHTENING TORQUES SPECIFICATION
| Item | N.m | kgf.m | lb. ft | |
|---|---|---|---|---|
| Front | Tire wheel hub nuts | 88.3 ~ 107.9 | 9.0 ~ 11.0 | 65.1 ~ 79.6 |
| Drive shaft coking nut | 274.6 ~ 294.2 | 28.0 ~ 30.0 | 202.5 ~ 217.0 | |
| Strut assembly to knuckle | 137.3 ~ 156.9 | 14.0 ~ 16.0 | 101.3 ~ 115.7 | |
| Caliper guide rod bolt | 21.6 ~ 31.4 | 2.2 ~ 3.2 | 15.9 ~ 23.1 | |
| Brake caliper mounting bolt | 78.4 ~ 98.0 | 8.0 ~ 10.0 | 57.8 ~ 72.3 | |
| Wheel speed sensor mounting bolt | 6.8 ~ 10.7 | 0.7 ~ 1.1 | 5.0 ~ 7.9 | |
| Brake disc mounting screw | 4.9 ~ 5.8 | 0.5 ~ 0.6 | 3.6 ~ 4.3 | |
| Lower arm to knuckle | 58.8 ~ 70.6 | 6.0 ~ 7.2 | 43.4 ~ 52.1 | |
| Tie rod end ball joint nut | 23.5 ~ 33.3 | 2.4 ~ 3.4 | 17.4 ~ 24.5 | |
| Rear | Tire wheel hub nuts | 88.2 ~ 107.8 | 9.0 ~ 11.0 | 65.0 ~ 79.5 |
| Rear caliper guide rod bolt | 21.6 ~ 31.4 | 2.2 ~ 3.2 | 15.9 ~ 23.1 | |
| Rear caliper to torsion beam axle | 63.7 ~ 73.5 | 6.5 ~ 7.5 | 47.0 ~ 54.2 | |
| Rear hub assembly to torsion beam axle | 49.0 ~ 58.8 | 5.0 ~ 6.0 | 36.2 ~ 43.3 | |
| Disc fixing screw | 4.9 ~ 5.9 | 0.5 ~ 0.6 | 3.6 ~ 4.3 | |